SmartDisc Realtime units Firmware update V1.68 September 2008
Firmware V1.66 2008-08-26
(Support of all functions only with SmartControl 3.78/SmartControl PRO 3.78 or higher)
Timing behaviour is altered for the Generic protocol PTZ commands
Firmware V1.64 2008-08-12
(Support of all functions only with SmartControl 3.78/SmartControl PRO 3.78 or higher)
CI Adapter: arm/disarm input now correctly arms/disarms the alarm inputs from the CI Adapter
Web Server connection corrected: In the case of an alarm the Web Server connection isn't interrupted
E-mail delivery optimised
Automatic IP address assignment (DHCP option) corrected
IMPORTANT - PLEASE READ CAREFULLY
YOU NEED TO READ AND AGREE TO THIS NOTICE BEFORE YOUR SELECTED DOWNLOAD CAN START.
In view of the inherent risks of downloading software from the internet, it is recommended that before downloading software updates from this site, you install the latest commercially available virus protection software on your computer. No warranty is given by Norbain SD Limited in relation to the software updates which may be downloaded from this site. In particular, Norbain SD Limited does not warrant that they are free from viruses or other harmful code, or that their operation shall be uninterrupted or error free. Norbain SD Limited excludes any liability arising from or in connection with software updates downloaded from this site to the fullest extent permissible by law.
The software updates which may be downloaded from this site are supplied subject to the licence terms attached to or referred to with each update.
If you would like to make a general comment about any of the software available from this site please e-mail marketing@norbain.co.uk. However, please note that we are unable to give technical assistance on its use or operation.
