| Hardware: Brackets Camera Brackets |
2030
|
Dennard: 2030
Light duty wall bracket with cable management - Upto 10kg load
 |
|
 |
D431AI
|
Dennard: D431AI
Internal Camera Bracket, 1/4", White, 195mm, 4kg load
|
|
|
D431AIB
|
Dennard: D431AIB
Internal camera bracket, 1/4", black, 195mm, 4kg load
|
|
|
D433W
|
Dennard: D433W
Internal Camera Bracket, 1/4", White, 155mm, 4kg load
|
|
|
D214SP
|
Dennard: D214SP
Internal Camera Bracket, 1/4", Ash Grey, 159mm, 4kg load
 |
|
|
| Hardware: Corner Mount Dome Brackets |
DM/900016
|
Dennard: DM/900016
Vintage Corner Mount Adaptor
 |
|
|
| Hardware: Ceiling Mount Dome Brackets |
900001
|
Dennard: 900001
Tile Mount for 2055 Dome
|
|
|
| Hardware: Outdoor Housing Brackets |
D428B
|
Dennard: D428B
Cast light duty wall mount for P/T Max Load 7.5kg
|
|
|
D428IRD
|
Dennard: D428IRD
Wall Bracket and double IR lamp moun, 15kg payload, 318mm, for D506/D515/D516
|
|
|
D424
|
Dennard: D424
Cast Aluminium Heavy Duty Swivel Mount, 30kg, 450mm, D517
|
|
|
| Hardware: Outdoor Pan & Tilt Heads Brackets |
D642B
|
Dennard: D642B
Medium fixed bracket for use with Pan and Tilts, Max load 10Kg
|
|
|
D435500
|
D435500 Heavy Duty Wall Mount
Heavy Duty Wall Mount for Pan and Tilts requires D424, 30kg, 470mm, D517
|
|
|
D435600
|
D435600 Heavy Duty Wall Mount
Heavy Duty Wall Mount for Pan and Tilts requires D424, 30kg, 610mm, D517
|
|
|
| Hardware: Corner Mount Pan & Tilt Heads Brackets |
D435800
|
D435800 Heavy Duty Wall Mount
Heavy Duty Wall Mount for Pan and Tilts requires D424, 30kg, 840mm, D517
|
|
|
| Domes: Indoor Colour Fully Functional |
2055-202
|
Dennard: 2055-202
6" Indoor Dome Camera, 24V AC for RS485 or Coax c/w PSU + Receiver
|
|
|
2055-200
|
Dennard: 2055-200
6" Indoor Dome Camera, 24V AC for RS485 or Coax c/w PSU
|
|
|
2055-204
|
Dennard: 2055-204
6" Indoor Dome Camera, 24V AC for RS485 or Coax c/w PSU + AL008 Alarm Card
|
|
|
2055-207
|
Dennard: 2055-207
2055 Fixed Attitude Dome Camera with Colour Zoom Camera
|
|
|
2055-200
|
Dennard: 2055-200
6" Internal dome camera, 24V AC for RS485 or Coax c/w PSU
|
|
|
2055-202
|
Dennard: 2055-202
6" Internal dome camera, 24V AC for RS485 or Coax c/w PSU + Receiver with 4 Alarms
|
|
|
DM/2060-200
|
Dennard: DM/2060-200
|
|
|
| Domes: Oudoor Colour Fully Functional |
D2050/COAX
|
Dennard: D2050/COAX
6" indoor colour dome ceiling mount bracket, co-ax telemetry
|
|
|
| Domes: Vandal Resistant Colour Fully Functional |
DM/2060-008
|
Dennard: DM/2060-008
6" Fixed Attitude Dome, 1/4" 480 TVL, with 18-1 Zoom Col/Mono Camera + PSU
|
|
|
DM/2060-007
|
Dennard: DM/2060-007
Wall/Pendant, 1/4", 480 TVL, 1.5 lux, 4-74mm, AI, 18-24V, 752x582
|
|
|
| Domes: Oudoor Colour/Monochrome Fully Functional |
D2050/WP
|
Dennard: D2050/WP
6" outdoor colour/mono dome c/w heater/fan, ceiling mount bracket, RS485 control
|
|
|
2055-203
|
Dennard: 2055-203
6" Outdoor Day Night Dome Camera, 24V AC for RS485 or Coax c/w PSU + Receiver
|
|
|
2055-201
|
Dennard: 2055-201
6" Outdoor Day Night Dome Camera, 24V AC for RS485 or Coax c/w PSU
|
|
|
2055-205
|
Dennard: 2055-205
6" Outdoor Day Night Dome Camera, 24V AC for RS485 or Coax c/w PSU + AL008 Alarm Card
|
|
|
2055-208
|
Dennard: 2055-208
2055 Fixed Attitude Dome Camera with Colour/Mono Zoom Camera
|
|
|
2060-201
|
Dennard: 2060-201
The 2060 outdoor dome builds on the Dennard reputation for providing robust and reliable domes. Available with either a 26x or 18x optical zoom, a state-of-the-art internal mechanism combines precision with high levels of optical performance. Packaged in a vandal resistant, environmentally protected enclosure, the 2060 is an ideal solution for outdoor applications.
|
|
|
2060-203
|
Dennard: 2060-203
The 2060 outdoor dome builds on the Dennard reputation for providing robust and reliable domes. Available with either a 26x or 18x optical zoom, a state-of-the-art internal mechanism combines precision with high levels of optical performance. Packaged in a vandal resistant, environmentally protected enclosure, the 2060 is an ideal solution for outdoor applications.
|
|
|
2060-205
|
Dennard: 2060-205
6" Outdoor PAL Dome Cam 24V AC for RS45 or BBV & Baxall "up the coax" Control + PSU with AL008 Alarm card
|
|
|
D2050/COAX/WP
|
Dennard: D2050/COAX/WP
6" outdoor colour dome c/w heater/fan, coax telemetry
|
|
|
| Domes: Outdoor Housings Fully Functional |
DM/D554/8/JVC
|
Dennard: DM/D554/8/JVC
The Dennard 554 IP Mini-dome kits are elegantly styled, 8" diameter hemisphere, discreet environmental weatherproof dome enclosures. Available in a range of mounting configurations, the units are constructed from aluminium alloy spinnings and pressure die castings with acrylic hemispheres. Designed for ease of installation, service and relocation the complete assembly can be removed from its mounting in seconds. Release 4 fixings 1 1/2 turns, disconnect a connector, unhook a safety bond and the dome is free. The dome enclosure has been designed to offer level IP65 environmental protection to most of the popular range of PTZ network cameras (not supplied).
|
|
|
| Domes: Indoor Dummy Fully Functional |
2055-006
|
Dennard: 2055-006
6" Indoor/Outdoor Dummy Dome camera
|
|
|
| Domes: Other Dummy Fully Functional |
DM/2060-006
|
Dennard: DM/2060-006
The 2060 outdoor dome builds on the Dennard reputation for providing robust and reliable domes. Available with either a 26x or 18x optical zoom, a state-of-the-art internal mechanism combines precision with high levels of optical performance. Packaged in a vandal resistant, environmentally protected enclosure, the 2060 is an ideal solution for outdoor applications.
|
|
|
| Domes: High Resolution, Low Voltage Vandal Resistant Monochrome Fixed Domes |
DM/1000-106
|
Dennard: DM/1000-106
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
DM/1000-107
|
Dennard: DM/1000-107
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
DM/1000-108
|
Dennard: DM/1000-108
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
| Domes: Medium Resolution, Low Voltage Vandal Resistant Colour Fixed Domes |
DM/1000-103
|
Dennard: DM/1000-103
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
DM/1000-104
|
Dennard: DM/1000-104
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
DM/1000-105
|
Dennard: DM/1000-105
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
| Domes: High Resolution, Low Voltage Vandal Resistant Colour Fixed Domes |
DM/1000-100
|
Dennard: DM/1000-100
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
DM/1000-101
|
Dennard: DM/1000-101
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
DM/1000-102
|
Dennard: DM/1000-102
Dennard Series 1000 mini dome provides the end-user with pan and tilt adjustment of the camera view without the need to open the camera.
|
|
|
| Hardware: Wall Mount Indoor Housings |
D507
|
Dennard: D507
Dustproof IP50 - 296x117x80mm
|
|
|
2015
|
Dennard: 2015
The Dennard 2015 housing is designed to provide the installer with a quick, secure and reliable camera option for fixed and zoom cameras. Ideal for any application, the robust, IP66 rated die-cast Aluminum housing provides the camera with the necessary protection from a demanding environment. The internal camera cavity is simply accessed by loosening 2 screws with cable conduits led out through either full or semi cable managed bracketry. The 2015 has been designed to provide all the features of the 2010, but the increased capacity makes it possible to incorporate a wider selection of zoom cameras. The optional wiper module adds increased functionality to meet the demands of a high specification installation.
|
|
|
D2010/D
|
Dennard: D2010/D
The Dennard 2010 housing comprises a stylish pressure die cast enclosure, sized to suit the current range of CCD cameras with fixed focus lenses, plus wall bracket with cable management system. The equipment has been designed to provide weatherproof protection in an attractive package using the most modern manufacturing methods, which is reflected in its very competitive price.
|
|
|
| Hardware: 240V AC Outdoor Housings |
D515
|
Dennard: D515
The Dennard 515, 516, 517 range of environmental camera housings are designed to accommodate a wide range of camera / lens combinations and to provide protection to BS.EN 60529 Level IP 65 (no water ingress). Insulated camera platforms with longitudinal adjustment are supplied as standard, plus window heater, thermostat, three cable glands and full sunshield. Self parking wipers, 5 and 25 Litre washers are available and can be retro-fitted. The housings are constructed from aluminium alloy, powder coated and stoved with stainless steel fittings. Deep base versions are offered to allow telemetry receivers, relay interface units or cable termination trays to be fitted under the camera. The ventilated sunshield option has a fan fitted to the sunshield and allows the camera housing to be kept at a constant 1.5 / 2°C above the ambient air temperature.
|
|
|
| Hardware: 12V DC (With Bracket) Outdoor Housings |
D2010/12V
|
Dennard: D2010/12V
The Dennard 2010 housing comprises a stylish pressure die cast enclosure, sized to suit the current range of CCD cameras with fixed focus lenses, plus wall bracket with cable management system. The equipment has been designed to provide weatherproof protection in an attractive package using the most modern manufacturing methods, which is reflected in its very competitive price.
|
|
|
| Hardware: 240V AC (With Bracket) Outdoor Housings |
DM/508-050
|
Dennard: DM/508-050
|
|
|
| Hardware: 12/24V Outdoor Housings |
508/LV
|
Dennard: 508/LV
IP65 Vandal Resistant Housing 12-24V c/w Integral Bracket for Wall or Soffit Mount
|
|
|
506/LV
|
Dennard: 506/LV
IP65 Housing 12-24V c/w Sunshield
|
|
|
| Hardware: Low Wattage Bulbs Infra-Red |
D881M50
|
Dennard: D881M50
50W flood for D880 lamp
|
|
|
D881M20
|
Dennard: D881M20
Replacement bulb for 880 range of Microlights - 20W medium bulb
|
|
|
D881N20
|
Dennard: D881N20
Replacement bulb for 880 range of Microlights - 20W narrow bulb
|
|
|
D881N50
|
Dennard: D881N50
Replacement bulb for 880 range of Microlights - 50W narrow bulb
|
|
|
D884M75
|
Dennard: D884M75
Replacement bulb for 883 range of Microlights - 75W medium bulb
|
|
|
D884N75
|
Dennard: D884N75
Replacement bulb for 883 range of Microlights - 75W narrow bulb
|
|
|
| Hardware: 300W Bulbs Infra-Red |
D886M
|
D886M Replacement bulb
Replacement bulb for D885/D2020 range - 300W medium bulb
|
|
|
| Hardware: Low Wattage Lamps Infra-Red |
D880N50-715
|
Dennard: D880N50-715
The Dennard 880 and 883 microlights have been designed to provide a low power, low cost, high performance infra red illuminator, at a size complementing C.C.D camera equipment. The units are constructed from aluminium alloy, powder coated and stoved with stainless fittings. Silicone ‘O’ ring sealing and one metre of high temperature outdoor cable, factory fitted, offers weatherproofing to BS.EN.60529 Level IP65 (no water ingress). Average lamp life is 2000 hours with specially modified 12V 50mm tungsten halogen lamps. The 880 can be supplied with 20W or 50W bulbs. The 883 is fitted with a 75W bulb. Both illuminator types are available with spot or flood bulbs and a choice of 715nm or 830nm dichroic filters. Note: When fitting replacement lamps care must be taken not to touch the filament envelope or reflective inner face as this will be detrimental to the lamp life.
|
|
|
D883N75-715
|
Dennard: D883N75-715
The Dennard 880 and 883 microlights have been designed to provide a low power, low cost, high performance infra red illuminator, at a size complementing C.C.D camera equipment. The units are constructed from aluminium alloy, powder coated and stoved with stainless fittings. Silicone ‘O’ ring sealing and one metre of high temperature outdoor cable, factory fitted, offers weatherproofing to BS.EN.60529 Level IP65 (no water ingress). Average lamp life is 2000 hours with specially modified 12V 50mm tungsten halogen lamps. The 880 can be supplied with 20W or 50W bulbs. The 883 is fitted with a 75W bulb. Both illuminator types are available with spot or flood bulbs and a choice of 715nm or 830nm dichroic filters. Note: When fitting replacement lamps care must be taken not to touch the filament envelope or reflective inner face as this will be detrimental to the lamp life.
|
|
|
D883M75-715
|
Dennard: D883M75-715
The Dennard 880 and 883 microlights have been designed to provide a low power, low cost, high performance infra red illuminator, at a size complementing C.C.D camera equipment. The units are constructed from aluminium alloy, powder coated and stoved with stainless fittings. Silicone ‘O’ ring sealing and one metre of high temperature outdoor cable, factory fitted, offers weatherproofing to BS.EN.60529 Level IP65 (no water ingress). Average lamp life is 2000 hours with specially modified 12V 50mm tungsten halogen lamps. The 880 can be supplied with 20W or 50W bulbs. The 883 is fitted with a 75W bulb. Both illuminator types are available with spot or flood bulbs and a choice of 715nm or 830nm dichroic filters. Note: When fitting replacement lamps care must be taken not to touch the filament envelope or reflective inner face as this will be detrimental to the lamp life.
|
|
|
| Hardware: 300W Lamps Infra-Red |
D880M20-715
|
Dennard: D880M20-715
The Dennard 880 and 883 microlights have been designed to provide a low power, low cost, high performance infra red illuminator, at a size complementing C.C.D camera equipment. The units are constructed from aluminium alloy, powder coated and stoved with stainless fittings. Silicone ‘O’ ring sealing and one metre of high temperature outdoor cable, factory fitted, offers weatherproofing to BS.EN.60529 Level IP65 (no water ingress). Average lamp life is 2000 hours with specially modified 12V 50mm tungsten halogen lamps. The 880 can be supplied with 20W or 50W bulbs. The 883 is fitted with a 75W bulb. Both illuminator types are available with spot or flood bulbs and a choice of 715nm or 830nm dichroic filters. Note: When fitting replacement lamps care must be taken not to touch the filament envelope or reflective inner face as this will be detrimental to the lamp life.
|
|
|
DM/2020-300N715
|
Dennard: DM/2020-300N715
|
|
|
| Miscellaneous: Extension Poles Brackets Miscellaneous |
DM/90013
|
Dennard: DM/90013
Pendant Mount - 1000mm for 2060 & 2040 Dome
|
|
|
| Miscellaneous: Other Domes Miscellaneous |
D451
|
Dennard: D451
Internal pan only head, 3kg, 6º, 230V AC (110/24V AC), 146x78mm (DxH), 428B bracket, 1.35kg weight
|
|
|
| Miscellaneous: Wipers Housings Miscellaneous |
D515/221/95
|
Dennard: D515/221/95
Wiper arm for D515/W, D516, D517DB
|
|
|
| Miscellaneous: Power Supply Units Infra-Red Miscellaneous |
D880PSU
|
Dennard: D880PSU
230V input 12V output power supply for 880 Microlight (20W or 50W)
|
|
|
D883PSU
|
Dennard: D883PSU
230V input 12V output power supply for 883 Microlight (75W )
|
|
|
| Telemetry: Other Telemetry Miscellaneous |
DTX1000TPO
|
Dennard: DTX1000TPO
Twisted pair option- DTX1000 series only. Please notify at time of ordering.
|
|
|
| Hardware: AC, Low Voltage Outdoor Pan & Tilt Units |
DM/2000-230
|
Dennard: DM/2000-230
20kg load, top mount, 24V AC
|
|
|
2001/SP
|
Dennard: 2001/SP
Pan and Tilt, 24V AC, side mount
|
|
|
DM/2000-232
|
Dennard: DM/2000-232
20kg load, top mount, 24V AC, 12 degree per second pan
|
|
|
| Hardware: AC, Mains Outdoor Pan & Tilt Units |
D488
|
Dennard: D488
15Kg load, side mount, 240V AC
|
|
|
D2000/A
|
Dennard: D2000/A
20kg load, top mount, 240V AC, with auto pan
|
|
|
DM/2000-500
|
Dennard: DM/2000-500
20kg load, top mount, 240V AC
|
|
|
2000/CR
|
2000/CR Pan and Tilt Unit, Continuous rotation
Innovative design combined with advanced production techniques and modern styling make this unit the benchmark for the next generation of pan & tilt heads. Offered with externally adjustable limit switches or continuous pan rotation. Pre-position tell-back options are also available. Ease of maintenance and servicing has been significantly improved over conventional pan & tilt designs. All external fixings are the same size. Options and accessories can be retro-fitted with plug-in wiring. Dennard 2000 pan & tilt heads can be operated upright or inverted and are available in the following range of voltages: 230V AC (Type 2000) 110V AC (Type 2000-110) 24V AC (Type 2001) 24V DC (Type 2006).
|
|
|
2000/SP
|
Dennard: 2000/SP
Innovative design combined with advanced production techniques and modern styling make this unit the benchmark for the next generation of pan & tilt heads. Offered with externally adjustable limit switches or continuous pan rotation. Pre-position tell-back options are also available. Ease of maintenance and servicing has been significantly improved over conventional pan & tilt designs. All external fixings are the same size. Options and accessories can be retro-fitted with plug-in wiring. Dennard 2000 pan & tilt heads can be operated upright or inverted and are available in the following range of voltages: 230Va.c. (Type 2000) 110Va.c. (Type 2000-110) 24Va.c. (Type 2001) 24Vd.c. (Type 2006).
|
|
|
| Hardware: AC, Low Voltage, Pots Outdoor Pan & Tilt Units |
DM/2000-231
|
Dennard: DM/2000-231
Pan and Tilt, 24V AC, side mount c/w presets
|
|
|
| Hardware: AC, Mains, Pots Outdoor Pan & Tilt Units |
2000/PP/TP
|
Dennard: 2000/PP/TP
Innovative design combined with advanced production techniques and modern styling make this unit the benchmark for the next generation of pan & tilt heads. Offered with externally adjustable limit switches or continuous pan rotation. Pre-position tell-back options are also available. Ease of maintenance and servicing has been significantly improved over conventional pan & tilt designs. All external fixings are the same size. Options and accessories can be retro-fitted with plug-in wiring. Dennard 2000 pan & tilt heads can be operated upright or inverted and are available in the following range of voltages: 230Va.c. (Type 2000) 110Va.c. (Type 2000-110) 24Va.c. (Type 2001) 24Vd.c. (Type 2006).
|
|
|
DM/2000-501
|
Dennard: DM/2000-501
Pan and tilt, 230V AC, top mount c/w presets
|
|
|
| Hardware: DC, Pan, Pots Outdoor Pan & Tilt Units |
2006/CR
|
Dennard: 2006/CR
Pan and tilt, 24V DC, top mount with continuous rotation and presets
|
|
|
| Telemetry: Standard Keyboards Telemetry |
DM/DTX1000/KBD/DC
|
Dennard: DM/DTX1000/KBD/DC
As DM/DTX1000/KBD with joystick for proportional speed control
|
|
|
DM/DTX1500KBD
|
Dennard: DM/DTX1500KBD
|
|
|
| Telemetry: AC Reciever Recievers Telemetry |
DRX300PCB
|
Dennard: DRX300PCB
Pan and Tilt; lens with 1 Aux. Coax/Twisted pair receiver
 |
|
|
DRX300
|
Dennard: DRX300
Pan and Tilt; lens with 1 Aux. Coax/Twisted pair receiver in weatherproof box
|
|
|
DM/DRX100/24
|
Dennard: DM/DRX100/24
As DM/DRX100 230V AC powered with 24V AC-3A output to power certain domes. IP67 weather proof enclosure
|
|
|
| Telemetry: DC Reciever Recievers Telemetry |
DRX400PCB
|
Dennard: DRX400PCB
Pan and Tilt; lens; presets; 4 Aux. Coax/Twisted pair receiver.
|
|
|
DM/DRX400P/WBX
|
Dennard: DM/DRX400P/WBX
|
|
|
| Telemetry: Single Channel Transmitters Telemetry |
DTX300
|
Dennard: DTX300
DTX300 1 CAM TELEM TX 1 AUX COAX TP
|
|
|
DTX400
|
Dennard: DTX400
Co-ax & twisted pair
|
|
|
| Telemetry: <8 Channel Transmitters Telemetry |
DTX1000-8A-DC
|
Dennard: DTX1000-8A-DC
8 Camera 2 monitor telemetry transmitter c/w alarms and presets
|
|
|
DTX500
|
Dennard: DTX500
8 X 1 Desktop
|
|
|
DTX10008
|
Dennard: DTX10008
8 X 2 with keypad
|
|
|
DTX10008A
|
Dennard: DTX10008A
8 X 2 with keypad and alarms
|
|
|
DTX1008DC
|
Dennard: DTX1008DC
8 X 2 with Joystick keypad and alarms
|
|
|
DM/DTX1000/8/DC/MK2
|
Dennard: DM/DTX1000/8/DC/MK2
As DM/DTX1000/8 with joystick for proportional speed control
|
|
|
DM/DTX1000/8A/MK2
|
Dennard: DM/DTX1000/8A/MK2
As DM/DTX1000/8 with 16 normally closed alarm inputs
|
|
|
DM/DTX1000/8A/DC/MK2
|
Dennard: DM/DTX1000/8A/DC/MK2
As DM/DTX1000/8A/DC with joystick for proportional speed control
|
|
|
| Telemetry: 16 Channel Transmitters Telemetry |
DTX100016
|
Dennard: DTX100016
16 X 2 with keypad
|
|
|
DTX10016DC
|
Dennard: DTX10016DC
16 X 2 with keypad and alarms
|
|
|
DTX100016ADC
|
Dennard: DTX100016ADC
16 X 2 with keypad and alarms
|
|
|
DM/DTX1000/16/DC/MK2
|
Dennard: DM/DTX1000/16/DC/MK2
AS DM/DTX1000/16 with joystick for proportional speed control
|
|
|
DM/DTX1000/16A/MK2
|
Dennard: DM/DTX1000/16A/MK2
AS DM/DTX1000/16 with 16 normally closed alarm inputs
|
|
|
DM/DTX1000/16A/DC/MK2
|
Dennard: DM/DTX1000/16A/DC/MK2
As DM/DTV1000/16A/DC with joystick for proportional speed control
|
|
|
| Telemetry: 32 Channel Transmitters Telemetry |
DTX1000/32A/DC
|
Dennard: DTX1000/32A/DC
16 x 2 Matrix switcher with Keypad and Alarms
|
|
|
| Telemetry: Other Transmitters Telemetry |
DTXLD
|
Dennard: DTXLD
Line driver- required when a slave keyboard is to be used for distances over 50 metres
|
|
|
| Transmission: Contol Software Systems |
FOCUS-SW
|
Dennard: FOCUS-SW
FOCUS Control Software
|
|
|
| Transmission: Transmitter/Reciever Transceiver Systems |
D3000
|
Dennard: D3000
D3000 FOCUS IP Video and Audio Transceiver with ISDN
|
|
|
D3000/FP
|
Dennard: D3000/FP
D3000/FP FOCUS IP Video and Audio Transceiver with ISDN & Front Control Panel
|
|
|
